The YOKOGAWA absolute and gauge pressure transmitter model EJA510A and EJA530A can be used to measure liquid, gas, or steam pressure. Both output a 4 to 20mA DC signal corresponding to the measured pressure.
The EJA Series is available with BRAIN, HART, FOUNDATION™ fieldbus or PROFIBUS PA communication protocols.
We also can provide Rosemount Transmitter 3051.
| EJA510A / EJA530A Direct Mount Type Absolute Pressure and Gauge Pressure Transmitter (Measurement values below are in absolute for EJA510A) |
A Capsule | B Capsule | C Capsule | D Capsule |
Range | 0 to 200 kPa (0 to 29 psi) | 0 to 2 MPa (0 to 290 psi) | 0 to 10 MPa (0 to 1450 psi) | 0 to 50 MPa (0 to 7200 psi) |
Span | 10 to 200 kPa (1.45 to 29 psi) | 0.1 to 2 MPa (14.5 to 290 psi) | 0.5 to 10 MPa (72.5 to 1450 psi) | 5 to 50 MPa (720 to 7200 psi) |
Accuracy | ±0.2% | ±0.2% | ±0.2% | ±0.2% |
Degrees of protection | IP67, NEMA 4X, and JIS C0920 immersion proof |
Certificates | FM, CENELEC ATEX, CSA, IECEx |
Output | 4 to 20 mA DC or FOUNDATION™ fieldbus or PROFIBUS PA 2-wire system with digital communication |
Supply voltage | BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) Fieldbus:9 to 32 V DC (9 to 24 V DC for Entity model and 9 to 17.5 V DC for FISCO model) |
Ambient temperature | -40 to 85 deg C (-40 to 185 deg F) (general use type) -30 to 80 deg C (-22 to 176 deg F) (with integral indicator) |
Process temperature | -40 to 120 deg C (-40 to 248 deg F) (general use type) |
Maximum overpressure | 4 MPa (580 psi) | 4 MPa (580 psi) | 20 MPa (2900 psi) | 60 MPa (8500 psi) |
Mounting | Direct Mounting/2-inch pipe mounting |
Wetted parts material | Capsule | Hastelloy C-276 |
Process connection | SUS316L, Hastelloy C-276 |
Housing | Cast aluminum |
Model Selection
For more we can help, please feel free to contact me.